Skip to content
NetworkTechGuy
Subscribe
← All topics

Posts tagged "cisco"

  1. 802.11ax Cisco APs not getting IP address from the DHCP server

    #802-11ax #ax #c9105ax

    This post is more of a reminder for myself to remember this in the future. With introduction of Cisco AX access points, the requirement is for the APs to be able to resolve gateway IP address sent via DHCP in ARP. If that doesn't work, no IP address for you! Usually this is not a problem, but I was

    2 min read

  2. Cisco ASDM fails to start on Windows 10

    #asdm #cisco #windows-10

    In this article we explain how to resolve a common issue with Windows 10 OS when starting Cisco ASDM

    1 min read

  3. Configure route-based VPN tunnel on Cisco ASA

    #asa #cisco #vpn

    In this article we explain how to configure a basic route-based site-2-site VPN tunnel

    1 min read

  4. Upgrading from Cisco IOS XE Gibraltar in Install mode

    #gibraltar #cisco #ios-xe

    This procedure explains how to upgrade Cisco IOS XE devices that currently run Gibraltar in install mode to a higher version.

    2 min read

  5. Configure StackWise Virtual on Cisco 9500

    #9500 #cisco #vss

    StackWise Virtual is a Cisco proprietary technology that we use on their newer high-end switches to enable stacking. In the past we had to use special Cisco stacking cables to enable stacking. With the newer Cisco models, we can achieve pretty much the same functionality through SWV. As per Cis

    1 min read

  6. Configure portchannel on Cisco 9500

    #9500 #cisco #portchannel

    Portchannel is Cisco’s implementation of the EtherChannel technology, (usually) based on the 802.3ad standard). Step-by-step guide Portchannel configuration To configure portchannel on Cisco 9500, first create a portchannel interface: ! interface Port-channel1 description *** Port-Chan

    1 min read